Mercedes-Benz CLS Owner's Manual page 134

Moving the wiper arms into the replacement
position
Switch the ignition on and then off again
#
immediately.
Within around 15 seconds, press and hold
#
the î button on the combination switch
for approximately three seconds
( page 130).
/
The wiper arms will move into the replace‐
ment position.
Removing the wiper blades
Fold the wiper arms away from the wind‐
#
screen.
Hold the wiper arm with one hand. With the
#
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
far as it will go.
Slide catch 2 in the direction of arrow
#
until it engages in the removal position.
Remove the wiper blade from the wiper arm
#
in the direction of arrow 4.
Fitting the wiper blades
Insert the new wiper blade into the wiper
#
1 as
arm in the direction of arrow 1.
Slide catch 2 in the direction of arrow
#
3
until it engages in the locking position.
Make sure that the wiper blade is seated cor‐
#
rectly.
Light and sight 131
3