Wheel Change - Mercedes-Benz CLS Owner's Manual

332 Wheels and tyres
driving with a high load
R
The tyre pressure loss warning system is only an
aid. It is the driver's responsibility to set the tyre
pressure to the recommended cold tyre pressure
suitable for the operating situation and to check
it.
Be sure to also observe the following further
related subjects:
Notes on tyre pressure (
/
R
Display messages about the tyres
R
( page 404)
/
Restarting the tyre pressure loss warning
system
Requirements:
The recommended tyre pressure is correctly
R
set for the respective operating status on all
wheels.
Restart the tyre pressure loss warning system in
the following situations:
The tyre pressure has changed.
R
The wheels or tyres have been changed or
R
newly fitted.
On-board computer:
Service
4
Swipe downwards on Touch Control on the
#
left-hand side of the steering wheel.
The Run Flat Indicator active Restart
sage is shown in the multifunction display.
To begin restart, press Touch Control on the
#
left-hand side of the steering wheel.
The Tyre pressure now OK?
page 328)
shown in the multifunction display.
Select Yes.
#
To confirm restart, press Touch Control on
#
the left-hand side of the steering wheel.
The Run Flat Indicator restarted
shown in the multifunction display.
After you have driven for a few minutes, the
tyre pressure loss warning system monitors
the set tyre pressures of all the tyres.
Be sure to also pay attention to the following
related topic:
Notes on tyre pressure (
R
Tyres
5
mes‐
message is
message is
page 328)
/

Wheel change

Notes on selecting, fitting and replacing
tyres
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
& WARNING Risk of accident due to incor‐
rect dimensions of wheels and tyres
If wheels and tyres of the wrong size are
used, the wheel brakes or wheel suspension
components may become damaged.
Always replace wheels and tyres with
#
those that fulfil the specifications of the
original part.
When replacing wheels, make sure to fit the
correct:
Designation
R
Type
R