Mercedes-Benz CLS Owner's Manual page 313

310 Breakdown assistance
TIREFIT kit storage location
The TIREFIT kit is located under the boot floor.
1
Tyre sealant bottle
2 Tyre inflation compressor
Depending on the model, the TIREFIT kit may
also be located in other places under the boot
floor.
% You can find information on the power cate‐
gory (LK) and/or electrical data on the back
of the tyre inflation compressor:
LK2 – 12 V/15 A, 180 W, 0.8 kg
R
At a distance of approximately 1 m to the
tyre inflation compressor and approximately
1.6 m above the ground, the following sound
pressure levels apply:
Emissions sound pressure level
R
L 83 dB (A)
PA
Sound power level L 91 dB (A)
R
WA
The tyre inflation compressor is mainte‐
nance-free. If there is a malfunction, please
contact a qualified specialist workshop.
Using the TIREFIT kit
Requirements:
Tyre sealant bottle and tyre inflation com‐
R
pressor ( page 310).
/
TIREFIT sticker
R
Gloves (depending on the vehicle equipment)
R
You can use TIREFIT tyre sealant to seal perfora‐
tion damage of up to 4 mm, particularly those in
the tyre contact surface. You can use TIREFIT in
outside temperatures down to -20°C.
& WARNING Risk of accident when using
tyre sealant
The tyre sealant may be unable to seal the
tyre properly, especially in the following
cases:
there are large cuts or punctures in the
R
tyre (larger than damage previously men‐
tioned)
the wheel rims have been damaged
R
after journeys with very low tyre pressure
R
or with flat tyres
Do not continue driving.
#
Consult a qualified specialist workshop.
#
& WARNING Risk of injury and poisoning
from tyre sealant
Tyre sealant is hazardous to health and cau‐
ses irritation. Do not allow it to come into
contact with your skin, eyes or clothing, and
do not swallow it. Do not inhale any vapours.
Keep the tyre sealant away from children.