Sockets - Mercedes-Benz CLS Owner's Manual

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

Secure the roof luggage rack to the fastening
#
points beneath covers 1.
Comply with the installation instructions of
#
the roof luggage rack manufacturer.
Secure the load on the roof luggage rack.
#

Sockets

Using the 12 V socket
Requirements:
Only connect devices up to a maximum of
R
180 W (15 A).
Depending on the vehicle equipment, the vehicle
has a 12 V socket in the stowage compartment
in the front centre console. In addition, depend‐
ing on the vehicle equipment, the vehicle has a
12 V socket in the stowage compartment in the
rear centre console.
Example: 12 V socket in the stowage compartment
in the front centre console
Briefly press the trim element of the cover on
#
the front.
The cover opens in the direction of the arrow.
Lift up cap
1
of the socket and insert the
#
plug of the device.
If you have connected a device to the 12 V
socket, leave the cover of the stowage compart‐
ment open.
Seats and stowing 115
Using the 230 V socket in the rear passenger
compartment
& DANGER Risk of fatal injury due to dam‐
aged connecting cables or sockets
You could receive an electric shock if the
connecting cable or the 230 V power socket
is pulled out of the trim or is damaged or
wet.
Use only connecting cables that are dry
#
and free of damage.
When the ignition is switched off, make
#
sure that the 230 V power socket is dry.
Immediately have the 230 V power
#
socket checked or replaced at a quali‐
fied specialised workshop if it is dam‐
aged or has been pulled out of the trim.
Never plug the connecting cable into a
#
230 V power socket that is damaged or
has been pulled out of the trim.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents