Warning And Indicator Lamps - Mercedes-Benz CLS Owner's Manual

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

Display messages
5
Engine oil pressure Stop
Switch off engine
5
Engine oil level cannot be
measured

Warning and indicator lamps

Overview of indicator and warning lamps
Some systems will perform a self-test when the
ignition is switched on. Some indicator and
warning lamps may briefly light up or flash. This
behaviour is non-critical. These indicator and
warning lamps indicate a malfunction only if they
Possible causes/consequences and
* The oil pressure is too low.
* NOTE Engine damage caused by driving with insufficient oil pressure
Avoid driving with insufficient oil pressure.
#
Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving.
#
Consult a qualified specialist workshop.
#
* The electrical connection to the oil level sensor has been interrupted or the oil level sensor is faulty.
Consult a qualified specialist workshop.
#
light up or flash after the engine has been star‐
ted or during a journey.
Display messages and warning/indicator lamps 413
M M
Solutions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents