Wds Operating Mode; Changing Room Temperature - Trane BCHE Installation, Operation And Maintenance Manual

Installation - Controls
1. Verify that the sensor is in operating mode and at the
home screen.
2. Choose a setting to lock or unlock:
a. Select the setpoint by pressing the up or down
arrow.
b. From the system menu press the down arrow to
select the fan menu. Use the left or right arrow to
choose the setting.
Fan Menu
3. Press the left and right arrows for 4 seconds.
Figure 81. Locking and unlocking settings
Note: If you try to access a feature that is locked, the
locked symbol will appear on the display. If you
press a keypad button to try change a locked setting,
the locked symbol will flash.
80

WDS Operating Mode

This section describes how to operate the wireless display
sensor (WDS). The following figure shows an example of a
WDS that has been configured and is in operating mode.
Figure 82. Wireless display sensor (model WDS) in
operating mode
Temperature
Fan settings
Test symbols
(appear when Test
button is pushed)
Occupancy
indicator/
Error code
Keypad
Test button

Changing Room Temperature

This symbol shows the
current room
temperature, or your
setpoint selection while
you are making an
adjustment.
When you select a
setpoint, this symbol
appears.
1. To increase the room
temperature, press up
arrow.
To decrease the room
temperature, press down
arrow.
2. To confirm, press center
button or wait 5 seconds.
The display will return to
the home screen.
BCX-SVX002A-EN