Table 24. Configuration options for wireless display sensors
Setting
Temperature
•
Choose Fahrenheit or Celsius
•
Choose the degree resolution
(whole degrees, half degrees, or
tenths of degrees).
Setpoint
System
Fan
Note: Not all fan options are available
for all systems.
Occupancy (timed override)
Displaying Setpoint or Temperature
You can configure the sensor to display either the
temperature (default) or setpoint. To select either option:
1. Verify that the sensor is in operating mode and at the
home screen.
2. Press the up and down arrows for 3 seconds. The
arrow indicates setpoint display, as shown in the
following figure.
BCX-SVX002A-EN
Configuration Options
No system
options enabled
Auto/Off
Auto/Off/
Low/High
Off/High (On)
Off/Low/High
terminal
Occupancy
Occupancy
enabled
disabled
Auto/Off/Low
Med/High
Off/Low/
No fan options
Med/High
enabled
Figure 80. Displaying setpoint or temperature
Arrow indicates
setpoint display
Temperature
Locking or Unlocking Settings
You can lock or unlock the setpoint, system, or fan setting
to prevent changes. To lock or unlock a setting:
Installation - Controls
Connecting wires to
Setpoint
79