Monitor Hardware Raid System With "Maxview Storage Manager - Siemens SIMATIC IPC647E Operating Instructions Manual

Configuring hardware RAID adapter card settings (Configure Controller Settings)
1. After setting up the RAID system, select "Configure Controller Settings" from the main menu.
2. Select "Modify Controller Settings".
Check or change the value of the following firmware entry:
3. Press the </Esc> key twice.
4. Select "Array Configuration".
5. Select "Manage Arrays" and then select the desired Array.
6. Select "List Logical Drives" and then select the desired Logical Drive.
7. Select "Edit Logical Drive".
Select "Modify Controller Settings".
Check or change the value of the following firmware entry:
8. Select [Submit Changes] to save your settings.
9. Select [Back to Main Menu].
10.Finish the process by pressing the <ESC> key repeatedly.
5.4.2.4

Monitor hardware RAID system with "maxView Storage Manager".

With the " maxView Storage Manager" software, you can monitor your hardware RAID system
and display important information to diagnose the system.
The first time you call "maxView Storage Manager", Microsoft Edge opens and displays a
warning message.
Then install the website security certificate.
Requirement
• 4 GB main memory
• The operating system is restarted.
• The operating system is protected with a user name and password
• You have administrator rights
SIMATIC IPC647E
Operating Instructions, 09/2022, A5E52254141-AA
Firmware entry
Configured Physical Drive Write Cache State
Firmware entry
Acceleration method
Operating the device
Value
<Disabled>
Value
<Controller Cache>
5.4 RAID systems
81