Managing The Hardware Raid System; Calling Adaptec Maxview Storage Manager - Siemens SIMATIC IPC1047 Operating Instructions Manual

Device maintenance and repair

7.4 Managing the Hardware RAID system

7.4 Managing the Hardware RAID system
The status of the RAID system is displayed using the ADAPTEC controller. Additional
software is not required. Additional information is available in the sections "RAID systems
(Page 42)" and "Installing and configuring the Hardware RAID adapter card (Page 69)".
7.4.1

Calling Adaptec maxView Storage Manager

The Internet Explorer opens when you call the Adaptec maxView Storage Manager for the
first time. The following message is displayed depending on the operating system:
● Windows 7 32-bit/64-bit, Windows Server 2008 R2, Windows Server 2012 R2: "There is a
problem with this website's security certificate".
● Windows Server 2008 R2, Windows Server 2012 R2: "Content from the website listed
below is being blocked by the Internet Explorer Enhanced Security Configuration.
https://127.0.0.1"
You can find step-by-step instructions on installing the certificate and setting up the trusted
sites on the Internet at the following address: Details: Instructions for calling the Adaptec
maxView Storage Manager
(http://support.automation.siemens.com/WW/view/en/102295361)
82
Operating Instructions, 09/2018, A5E45118479-AA
SIMATIC IPC1047