Motherboard Installation - Supermicro X13SAE User Manual

Super X13SAE/X13SAE-F User's Manual

2.3 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Phillips
Screwdriver (1)
Location of Mounting Holes
AUDIO_FP
JPAC1
COM1
USB2/3
JTPM1
SP1
JF1
JD1
JPME2
JLED1
JSTBY1
PCI-E M.2-M1
JSD1
JL1
JWD1
Notes: 1. To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
2. Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to the
chassis.
Phillips Screws (9)
LED4
UID
BMC
BMC_HB_LED
JPL2
MAC CODE
BMC CODE
BAR CODE
BIOS LICENSE
X13SAE-F
REV:1.00
DESIGNED IN USA
MAC CODE
PCI-E M.2-M2
PCH
JBT1
BT1
USB11 (3.2 (20Gb))
JPG1
I-SATA0 I-SATA2 I-SATA4 I-SATA6
I-SATA1 I-SATA3 I-SATA5 I-SATA7
Only if Needed
AUDIO
LAN2 LAN1 IPMI_LAN
USB8/9 (3.2 (10Gb)) USB7 (3.2 (10Gb))
USB0/1
USB10 (3.2 (20Gb))
JPL1
PCI-E M.2-M3
CATERR_LED
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB4/5 (3.2 (5Gb)) USB6 (3.2 (5Gb))
JPW1
SYS_FAN2
32
Standoffs (9)
DP
VGA HDMI
DVI
CPU_FAN1
JPW2
CPU_FAN2
12V_PUMP_PWR1
JPI2C1
SYS_FAN1