Supermicro X13SAE User Manual page 17

Peripheral Devices
•
Two USB 2.0 ports on the rear I/O panel (USB0/1, Type-A)
•
One front accessible USB 2.0 header with two USB connections (USB2/3)
•
One front accessible USB 3.2 Gen. 1 header with two USB connections (USB4/5, 5Gb)
•
One internal USB 3.2 Gen. 1 connector (USB6, 5Gb, vertical Type A)
•
Three USB 3.2 Gen. 2 ports on the rear I/O panel (USB7/8/9, 10Gb, Type-A)
•
One USB 3.2 Gen. 2x2 port on the rear I/O panel (USB10, 20Gb, Type-C)
•
One front accessible USB 3.2 Gen. 2x2 20-pin header with one USB connection (USB11, 20Gb)
BIOS
•
256Mb AMI BIOS SPI Flash BIOS
®
•
ACPI 6.0, Plug and Play (PnP), BIOS rescue hot-key, riser card auto detection support, and SMBIOS 3.0 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Wake-on-LAN
•
Power supply monitoring
System Health Monitoring
•
Onboard voltage monitoring for +12V, +5V, +3.3V, CPU, Memory, VBAT, +5V stdby, +3.3V stdby, +1.8V PCH, +1.05V PCH,
CPU temperature, VRM temperature, PCH temperature, system temperature, and memory temperature
•
5 CPU switch phase voltage regulator
•
CPU thermal trip support
•
Platform Environment Control Interface (PECI)/TSI
Fan Control
•
Single cooling zone
•
Multi-speed fan control via onboard Super I/O
•
Five 4-pin fan headers
System Management
•
Trusted Platform Module (TPM) support
•
SuperDoctor® 5
•
Chassis intrusion header and detection
Note: Please connect a cable from the Chassis Intrusion header at JL1 to the chassis to receive an alert.
LED Indicators
•
BMC_HB_LED
•
CATERR_LED
•
Power LED
•
UID LED (X13SAE-F, IPMI only)
Note: The table above is continued on the next page.
Motherboard Features
17
Chapter 1: Introduction