Supermicro X13SAE User Manual page 28

Super X13SAE/X13SAE-F User's Manual
Installing a CPU Heatsink
Note 1: The installation described in this section is for reference only. The actual in-
stallation steps may vary depending on the CPU heatsink model. Please refer to the
heatsink instruction for more details.
Note 2: Graphic drawings included in this manual are for reference only. They might
look different from the components installed in your system.
1. Loosen four screws to release the backplate. Note that one screw is not shown in the
illustration below.
Backplate
2. If there is a thin layer of protective film on the backplate, please remove it.
Protective film
Heatsink
Unscrew
Backplate
top side
28
Unscrew
Unscrew