Supermicro X13SAE User Manual page 106

Super X13SAE/X13SAE-F User's Manual
*If the feature above is set to Enabled, the following features will become available
for configuration:
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are No, Yes, On next
reset, and Yes, On every reset.
When SEL is Full
This feature allows you to decide what the BIOS should do when the system event log is
full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.
BMC Network Configuration
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes.
* If this feature above is set to Yes, the following features will become available for
configuration:
Configure IPv4 Support
IPMI LAN Selection
This feature displays the IPMI LAN setting. The default setting is Dedicated.
IPMI Network Link Status
This feature displays the IPMI Network Link status. The default setting is Dedicated LAN.
Configuration Address Source
This feature allows you to select the source of the IP address for this computer. If Static is
selected, you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic
Host Configuration Protocol) server in the network that is attached to and request the next
available IP address for this computer. The options are DHCP and Static.
106