Supermicro X13SAE User Manual page 92

Super X13SAE/X13SAE-F User's Manual
OCR Disable Secure Boot
This feature allows CSME to request SecureBoot to be disabled for One Click Recovery.
The options are Disabled and Enabled.
PCIe/PCI/Pnp Configuration
Option ROM execution
Video
This feature controls which option ROM to execute for the Video device. The options are
Do Not Launch and EFI.
PCI PERR/SERR Support
Select Enabled to allow a PCI device to generate a PERR/SERR number for a PCI Bus
Signal Error Event. The options are Disabled and Enabled.
Above 4GB MMIO BIOS Assignment
Select Enable for remapping of BIOS above 4GB. The options are Enabled and Disabled.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options
are Disabled and Enabled.
BME DMA Mitigation
Enable this feature to help block DMA attacks. The options are Disabled and Enabled
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled
and EFI.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
Consistent Device Name Support
Use this feature to enable device name support for onboard devices and slots. The options
are Disabled and Enabled.
92