Supermicro X13SAE User Manual page 3

About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X13SAE/X13SAE-F motherboard.
About This Motherboard
The Supermicro X13SAE/X13SAE-F supports a single 12th Generation Intel® Core
i7/i5/i3 series processor (LGA1700 socket) with up to 16 cores (8+8 cores) and a thermal
design power (TDP) of up to 125W. Built with the Intel PCH W680 chipset, this motherboard
supports up to 128GB of Unbuffered (UDIMM) ECC/Non-ECC DDR5 memory, with speeds
of up to 4400MHz (1DIMM) or 4000MHz (2DPC) in four 288-pin memory slots, three M.2
sockets, 2.5GbE/1GbE Base-T ports, and a Trusted Platform Module (TPM) header. The
X13SAE/X13SAE-F is optimized for high-performance, high-end computing platforms that
address the needs of next generation server applications. Please note that this motherboard is
intended to be installed and serviced by professional technicians only. For processor/memory
updates, please refer to our website at http://www.supermicro.com/products/.
Note: Memory capacity and frequency is CPU dependent.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Warning! Indicates high voltage may be encountered while performing a procedure.
Important: Important information given to ensure proper system installation or to relay
safety precautions.
Note: Additional Information given to differentiate various models or to provide information
for proper system setup.
Preface
3
Preface
i9/
TM