Supermicro X13SAE User Manual page 43

Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button. To turn off the power in the suspend mode, press the button for at least four seconds.
Refer to the table below for pin definitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
1
1 2
Power Button #1~2
Ground
Reset Button
#3~4
Ground
2
Vcc
Vcc
Vcc
Vcc
Vcc (X13SAE)
UID SW (X13SAE-F)
Vcc
X
NMI
19 20
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 Ground
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
1. Power Button
2. Reset Button
Power Fail LED
OH/Fan Fail LED
NIC2 LED
NIC1 LED
HDD LED
Power LED
X
Ground
43
Chapter 2: Installation