Table of Contents
Advertisement
Super X13SAE/X13SAE-F User's Manual
2.9 Jumper Settings
How Jumpers Work
To modify the operation of the motherboard, jumpers can be used to choose between optional
settings. Jumpers create shorts between two pins to change the function of the connector.
Pin 1 is identified with a square solder pad on the printed circuit board. Refer to the diagram
below for an example of jumping pins 1 and 2. Refer to the motherboard layout page for
jumper locations.
Note: On two-pin jumpers, "Closed" means the jumper is on and "Open" means the
jumper is off the pins.
Connector Pins
LAN Enable/Disable
JPL1 and JPL2 will enable or disable the LAN1 and LAN2
ports on the motherboard. Refer to the table on the right
for jumper settings. The default setting is Enabled.
2
AUDIO_FP
BMC
BMC_HB_LED
JPL2
JPAC1
MAC CODE
BMC CODE
COM1
BAR CODE
BIOS LICENSE
X13SAE-F
USB2/3
REV:1.00
DESIGNED IN USA
MAC CODE
JTPM1
PCI-E M.2-M2
JF1
SP1
JD1
PCH
JBT1
JPME2
JLED1
BT1
JSTBY1
PCI-E M.2-M1
JSD1
JL1
JWD1
I-SATA0
I-SATA2
I-SATA4
I-SATA6
I-SATA1
I-SATA3
I-SATA5
I-SATA7
Top View
LED4
UID
AUDIO
LAN2
LAN1
IPMI_LAN
USB8/9 (3.2 (10Gb))
USB7 (3.2 (10Gb))
USB0/1
USB10 (3.2 (20Gb))
JPL1
1
PCI-E M.2-M3
CATERR_LED
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB11 (3.2 (20Gb))
USB4/5 (3.2 (5Gb)) USB6 (3.2 (5Gb))
SYS_FAN2
JPG1
Connector Pins with a Jumper
installed on Pins 1 and 2
Jumper Setting
Pins 1-2
Pins 2-3
1. LAN1 Enable/Disable
2. LAN2 Enable/Disable
DP
VGA
HDMI
DVI
CPU_FAN1
JPW2
CPU_FAN2
12V_PUMP_PWR1
JPI2C1
SYS_FAN1
JPW1
56
LAN1/LAN2 Enable/Disable
Jumper Settings
Definition
Enabled (Default)
Disabled
Hide quick links:
Advertisement
Table of Contents
