Supermicro X13SAE User Manual page 120

Super X13SAE/X13SAE-F User's Manual
*If the feature above is set to Enabled, the following features will become available
for configuration:
Intel(R) AMT Configuration
Redirection feature
Note: The features listed here are only for enabling the capability. To execute these
features, you still need other tools like Intel AMT SDK.
SOL
Use this feature to enable the FW SOL Interface. The options are Disabled and En-
abled.
Storage Redirection
Use this feature to enable the FW Remote Storage Redirection. The options are Dis-
abled and Enabled.
KVM Feature Selection
Use this feature to enable the FW KVM feature. The options are Disabled and Enabled.
User Consent
User Opt-in
Use this feature to set the user consent. The options are None, KVM, and ALL. Refer
to the descriptions below for more option details.
• None: User consent is not required.
• KVM: Local user consent is required for a remote computer to establish KVM Remote
Control session.
• All: Local user consent is required for all features listed above.
Opt-in Configurable from Remote IT
Use this feature to enable the remote user's ability to change User OPT-IN Policy.
It allows the remote user to choose whether to request local user consent. Only the
local user can remote control the opt-in policy if selecting Disabled. The options are
Disabled and Enabled.
120