Supermicro X13SAE User Manual page 89

• Host addresses
• Route Table
• Gateway addresses
• DNS addresses
Interface ID
Enter an ID for the device
DAD Transmit Count
Enter a value for Duplicate Address Detection (DAD) Transmit Count. A value of zero
indicates the DAD is not performed. The default is 1.
Policy
Use this feature to set the Policy. The options are Automatic and Manual.
*If this feature is set to Manual, the following features will become available for
configuration:
Advanced Configuration
New IPv6 Address - Enter a new IPv6 address
New Gateway Addresses - Enter a Gateway address
New DNS Addresses - Enter a new DNS address
Commit Changes and Exit
Select this feature to save the changes you've made and return to the upper con-
figuration page.
Discard Changes and Exit
Select this feature to discard all the changes and return to the upper configuration
page.
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper configu-
ration page.
89
Chapter 4: UEFI BIOS