Supermicro X13SAE User Manual page 41

LAN Ports
Two Gigabit Ethernet ports (LAN1, LAN2) are located on the I/O back panel. In addition, a
dedicated IPMI LAN port (IPMI_LAN) is located above the USB0/USB1 ports on the I/O back
panel. All of these ports accept RJ45 cables. Please refer to the
for LAN LED information.
LAN1 Port
Pin Definitions
Pin# Definition Pin# Definition
19 SGND 28 SGND
20 TD0+ 29 Link 1000 LED (Yellow, +3V3SB)
21 TD0- 30 Link 100 LED (Green, +3V3SB)
22 TD1+ 31 P3V3SB
23 TD1- 32 Act LED
24 TD2+ 33 Ground
25 TD2- 34 Ground
26 TD3+ 35 Ground
27 TD3- 36 Ground
IPMI LAN Port (IPMI_LAN)
Pin Definitions
Pin# Definition
9
10 TD0+
11 TD0-
12 TD1+
13 TD1-
14 TD2+
15 TD2-
16 TD3+
17 TD3-
18 GND
Pin# Definition
19 GND
Act LED
20
(Yellow)
Link 100 LED
21
(Green)
Link 1000 LED
22
(Amber)
23 SGND
24 SGND
25 SGND
26 SGND
1 2 3
41
Section 2.10 LED Indicators
LAN2 Port
Pin Definitions
Pin# Definition Pin# Definition
10 SGND 19 SGND
11 TD0+ 20 Link 1000 LED (Yellow, +3V3SB)
12 TD0- 21 Link 100 LED (Green, +3V3SB)
13 TD1+ 22 P3V3SB
14 TD1- 23 Act LED
15 TD2+ 24
16 TD2- 25
17 TD3+ 26
18 TD3- 27
1. IPMI LAN Port (X13SAE-F only)
2. LAN1
3. LAN2
Chapter 2: Installation