Supermicro X13SAE User Manual page 44

Super X13SAE/X13SAE-F User's Manual
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table below
for pin definitions.
Overheat (OH)/Fan Fail LED
Connect an LED cable to OH/Fan Fail connections on pins 7 and 8 of JF1 to provide warnings
for chassis overheat/fan failure. Refer to the tables below for pin definitions.
Pin#
7
8
NIC1/NIC2 (LAN1/LAN2) LED
The Network Interface Controller (NIC) LED connection for LAN port 2 and LAN port 1 are
located on pins 9/10 and 11/12 of JF1 respectively. Attach an LED indicator to this header to
display network activity. Refer to the table below for pin definitions.
1 2
Power Button #1~2
Reset Button
#3~4
Vcc
Vcc
Vcc
Vcc
Vcc (X13SAE)
UID SW (X13SAE-F)
Vcc
X
NMI
19 20
Power Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
OH/Fan Fail LED
Pin Definitions (JF1)
Definition
+3.3V
OH/Fan Fail LED
NIC1/NIC2 LED
Pin Definitions (JF1)
Pin# Definition
9/11 +3.3V Stby
10/12 NIC2/NIC1 Active
1. Power Fail LED
Ground
2. OH/Fan Fail LED
Ground
1
Power Fail LED
3. NIC2 LED
2
OH/Fan Fail LED
4. NIC1 LED
3
NIC2 LED
4
NIC1 LED
HDD LED
Power LED
X
Ground
OH/Fan Fail Indicator
Pin Definitions (JF1)
State Definition
Off Normal
On Overheat
Flashing Fan Fail
44