Supermicro X13SAE User Manual page 122

Super X13SAE/X13SAE-F User's Manual
TCP/IP Settings
Wired LAN IPV4 Configuration
DHCP Mode
This feature allows the Intel ME to configure its network settings via the Dynamic
Host and Configuration Protocol (DHCP) server in the network. The options are
Disabled and Enabled.
*If the feature above is set to Disabled, the following features will become
available for configuration:
• IPV4 address: Enter a valid IP address.
• Subnet Mask: Enter a valid Subnet Mask address.
• Default Gateway Address: Enter your network's gateway IP address.
• Preferred DNS Address: The DNS server your network uses.
• Alternate DNS Address: A secondary DNS server your network uses
Network Access State
Use this feature to change network state of the Intel ME. When disabling, it will also clear
some other settings and disconnect to the network. The options are Network Active,
Network Inactive, and Full Unprovision.
Remote Setup And Configuration
Provisioning Record
This feature displays the system's provision PKI record data.
lowing is displayed:
• TLS provisioning mode
• Provisioning IP
• Date of Provision
• Estimated Time
• DNS
• Hash Data
• Hash Algorithm
• IsDefault
122
Information for the fol-