Appendix B. Cable And Port Specifications; Cables And Adapters Provided; Console Port; Console Port Pinouts - IBM SAN192C-6 Installation, Service And User Manual

Appendix B. Cable and Port Specifications
This appendix provides the cable and port specifications, and includes the following sections:
• x"Cables and Adapters Provided" on page 151
• "Console Port" on page 151
• "MGMT 10/100/1000 Ethernet Port" on page 152
• "Supported Power Cords and Plugs" on page 153

Cables and Adapters Provided

The IBM c-type director accessory kit includes the following items:
• RJ-45 rollover cable
• RJ-45/DSUB F/F adapter RJ-45 to DB-25 female DTE adapter (labeled Terminal)
• RJ-45/DSUB R/P adapter RJ-45 to DB-25 male DCE adapter (labeled Modem)
Note : Additional cables and adapters can be ordered from your customer service representative.

Console Port

The console port is an asynchronous RS-232 serial port with an RJ-45 connector. You can use the RJ-45
rollover cable and the RJ-45/DSUB F/F adapter or the RJ-45F PC terminal adapter to connect the console
port to a computer running terminal emulation software.

Console Port Pinouts

Table 44 on page 151 lists the pinouts for the console port on the IBM c-type director.
Table 44. Console Port Pinouts
Pin
1
2
3
4
5
6
7
8

Connecting the Console Port to a Computer Using the DB-25 Adapter

You can use the RJ-45 rollover cable and RJ-45/DSUB F/F adapter (labeled Terminal) to connect the
console port to a computer running terminal emulation software. Table 45 on page 152 lists the pinouts
for the console port, the RJ-45 rollover cable, and the RJ-45/DSUB F/F adapter.
©
Copyright IBM Corp. 2019, 2021
Signal
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
151