Table of Contents
Advertisement
2019 Jun 25 15:21:27 switch %PLATFORM-2-MOD_DETECT:
Module 6 detected (Serial number :unavailable)
Module-Type Supervisor Module-4 Model :unavailable
14. Wait for approximately 20 minutes for the new Supervisor-4 Module to come up in the HA-standby
state. Once the standby supervisor module is in the HA-standby state, the supervisor Status LED will
be green.
Note : If you see the following failure message, ignore the message, the active Supervisor-4 Module
will bring up the standby Supervisor-4 Module to the HA-standby supervisor state in some time.
2019 Jun 25 15:36:45 switch %SYSMGR-2-STANDBY_BOOT_FAILED:
Standby supervisor failed to boot up.
After inserting the new standby Supervisor-4 Module, the following message is displayed:
2019 Jun 25 15:36:45 switch %USBHSD-STANDBY-2-MOUNT: logflash: online
2019 Jun 25 15:36:49 switch %BOOTVAR-5-NEIGHBOR_UPDATE_AUTOCOPY:
auto-copy supported by neighbor supervisor, starting...
2019 Jun 25 15:38:30 switch %PLATFORM-1-PFM_ALERT:
Disabling ejector based shutdown on sup in slot 6
2019 Jun 25 15:39:38 switch %MODULE-5-STANDBY_SUP_OK:
Supervisor 6 is standby
2019 Jun 25 15:39:39 switch %PLATFORM-1-PFM_ALERT:
Enabling ejector based shutdown on sup in slot 5
15. Reinstall the license files on the new Supervisor-4 Modules.
switch(config)#
copy usb1:licenses_archive_file_name.tar bootflash:switch_license.tar
Copy progress 100% 10KB
Copy complete, now saving to disk (please wait)...
switch(config)# copy bootflash:switch_license.tar bootflash:switch_license.lic
Copy progress 100% 10KB
Copy complete, now saving to disk (please wait)...
switch(config)# install license bootflash:switch_license.lic
Installing license ...........................done
switch# show license usage
Feature
Ins
---------------------------------------------- ------------- ---------------
IOA_X9334
FM_SERVER_PKG
MAINFRAME_PKG
ENTERPRISE_PKG
SAN_ANALYTICS_PKG
SAN_TELEMETRY_PKG
-------------------------------------------
Refer the "Verification" on page 99 to verify that the Supervisor-1 Module configurations are
successfully applied to the Supervisor-4 Module.
switch# show module
Mod Ports
Module-Type
--- -----
----------------------------------
1
48
1/10 Gbps Ethernet Module
2
48
2/4/8/10/16 Gbps Advanced FC Module
3
24
40 Gbps FCoE Module
4
48
4/8/16/32 Gbps Advanced FC Module
5
0
Supervisor Module-4
6
0
Supervisor Module-4
standby
7
34
1/10/40G IPS,2/4/8/10/16G FC Module
8
48
4/8/16/32 Gbps Advanced FC Module
10
48
2/4/8/10/16 Gbps Advanced FC Module
Mod Sw
--- --------------- ------
1
8.4(1)
2
8.4(1)
3
8.4(1)
Lic Status
Expiry Date
Count
No
0
In use
No
-
Unused
No
-
Unused
Yes
-
Unused
No
-
In use
No
-
Unused
Hw
1.1
1.3
1.0
Comments
Grace 115D 2H
-
-
never
-
Grace 119D 20H
Grace 109D 1H
Model
----------------
DS-X9848-480K9
DS-X9448-768K9
DS-X9824-960K
DS-X9648-1536K9
DS-X97-SF4-K9
DS-X97-SF4-K9
DS-X9334-K9
DS-X9648-1536K9
DS-X9448-768K9
Chapter 3. Installing the IBM c-type SAN Device 91
Status
---------
ok
ok
ok
ok
active *
ha-
ok
ok
ok
Advertisement
Table of Contents
