Table of Contents
Advertisement
as needed, to perform required service actions. The customer is also responsible for using professional
movers/riggers in the case of equipment relocation or disposal.
Safety labels
As an added precaution, safety labels are often installed directly on products or product components to
warn of potential hazards. These can be either danger or caution notices, depending upon the level of the
hazard.
The actual product safety labels may differ from these sample safety labels:
Attention notices
An attention notice indicates the possibility of damage to a program, device, or system, or to data. An
exclamation point symbol may accompany an attention notice, but is not required. A sample attention
notice follows:
Attention : Do not bend a fibre cable to a radius less than 5 cm (2 in.); you can damage the cable.
Tie wraps are not recommended for optical cables because they can be easily overtightened,
causing damage to the cable.
DANGER : Heavy equipment—personal injury or equipment damage
might result if mishandled. (D006)
DANGER : Hazardous voltage, current, or energy levels are present inside
any component that has this label attached. Do not open any cover or
barrier that contains this label. (L001)
DANGER : Rack-mounted devices are not to be used as a shelf or work
space. (L002)
DANGER : Multiple power cords. The product might be equipped with
multiple power cords. To remove all hazardous voltages, disconnect all
power cords. (L003)
DANGER : Hazardous voltage present. Voltages present constitute a
shock hazard, which can cause severe injury or death. (L004)
CAUTION : Hazardous moving parts nearby. (L008)
Safety and environmental notices xxi
Advertisement
Table of Contents
