Table of Contents
Advertisement
Supported Components on the SAN192C-6
The SAN192C-6 director supports the following components:
• SAN192C-6 Chassis
• IBM c-type SAN Director Supervisor-4 module
• IBM c-type SAN Director Supervisor-1 module
• IBM c-type SAN Director 48 Port 32 Gbps Fibre Channel Switching Module
• IBM c-type SAN Director 24/10 port SAN Extension module
• SAN192C-6 Crossbar Switching Fabric-1 Module
• SAN192C-6 Crossbar Switching Fabric-3 Module
• SAN192C-6 Fan Module
• IBM c-type SAN Director 3000W AC power supply
• SAN192C-6 Accessory Kit
Chassis Description
This section describes the chassis in the IBM c-type SAN directors:
• "SAN768C-6 Chassis" on page 4
• "SAN384C-6 Chassis" on page 7
• "SAN192C-6 Chassis" on page 10
SAN768C-6 Chassis
The SAN768C-6 is an 18-slot chassis with two supervisor modules and up to 16 I/O modules. The chassis
holds up to six crossbar fabric switching modules, up to 16 AC power supplies, and three fan modules.
Airflow is front-to-back (port-side intake) in the SAN768C-6 chassis.
Note : The base configuration of the SAN768C-6 ships with two supervisor modules, six crossbar fabric
switching modules, and 12 power supplies.
To group the networking cables for each I/O module on this chassis, you can install cable management
frames on the chassis.
Figure 1 on page 5 shows the standard hardware features seen from the front of the chassis.
4 IBM Storage Networking SAN192C-6, SAN384C-6 and SAN768C-6: SAN192C-6, SAN384C-6 and SAN768C-6
Installation, Service, and User Guide
Advertisement
Table of Contents
