Displaying Installed License Keys - Juniper J4350 Getting Started Manual

Displaying Installed License Keys

Verify the license keys installed on the Services Router.
Purpose
From the CLI, enter the
Action
Sample Output
user@router> show system license keys
G03000002223 aeaqea qkjjhd ambrha 3tkqkc ayareb zicik6
G03000002224 aeaqea qkjjhd ambrha 3tkqkc ayargb zicik6
G03000002225 aeaqea qkjjhd ambrha 3tkqkc ayarab zicik6
The output shows a list of the license keys installed on the Services Router. Verify
What It Means
that each expected license key is present.
The number of used licenses matches the number of configured features. If a
licensed feature is configured, the feature is considered used. The sample
output shows that the DLSw and BGP route reflection features are configured.
A license is installed on the Services Router for each configured feature. For
every feature configured that does not have a license, one license is needed.
For example, the sample output shows that the user has configured the J-Flow
traffic analysis feature but has not purchased the license for it. An additional
license is required to be in compliance with license agreements.
show system license keys
nv6jck btlxao 2trfyq 65cdou r5tbbb xdarpg
qq53lu qcx4vm ydakcs t3yyh2 v5mq
nv6jck btlxao 2trfyq 65cdou r5tbof l4uon5
7rokz7 wgdocl r4q32p 2wu4zf zrxa
nv6jck btlxao 2trfyq 65cdou r5tbiu jr6ui2
lmqgqj ouzq5a aiokdn 4tr4u2 wmcq
Installing and Managing J-series Licenses
command.
Verifying J-series License Management
139