4-Port Fast Ethernet Epim - Juniper J4350 Getting Started Manual

Fast Ethernet LEDs indicate link status, port speed, and activity. Table 20
describes the meaning of the LEDs.
Table 20: LEDs for Dual-Port Fast Ethernet PIM
Label Color
LINK/SPEED Green (100 Mbps)
Yellow (10 Mbps)
Red
Green
ACTIVITY
Green

4-Port Fast Ethernet ePIM

You can install 4-Port Fast Ethernet ePIMs in any of the high-speed slots, as follows:
NOTE: For 4-port Fast Ethernet ePIMs, if you apply a CoS scheduler map on outgoing
(egress) traffic, the router does not divide the bandwidth appropriately among the
CoS queues. As a workaround, configure enforced CoS shaping on the ports.
The 4-Port 10/100-Mbps Fast Ethernet ePIM, shown in Figure 19, has
four physical Fast Ethernet ports.
Figure 19: 4-Port Fast Ethernet ePIM
State
On steadily
Disconnected
Blinking
On steadily
J4350—Install up to two 4-Port Fast Ethernet ePIMs in slots 3 and 6.
J6350—Install up to four 4-Port Fast Ethernet ePIMs in slots 2, 3, 5, and 6.
Physical Interface Modules Overview
Description
Online and link is active.
Link is unavailable.
Online with network traffic.
Online without traffic.
Field-Replaceable PIMs
41