Removing And Installing A Crypto Accelerator Module; Removing The Crypto Accelerator Module - Juniper J4350 Getting Started Manual

Removing and Installing a Crypto Accelerator Module

The Crypto Accelerator Module is a processor card that enhances performance of
cryptographic algorithms used in IP security (IPSec) services. The Crypto Module is
a standard feature on J6350 Services Routers and an optional feature on J4350
Services Routers.
Figure 51 shows the location of the Crypto Accelerator Module.
Figure 51: Crypto Accelerator Module Location
To modify a Crypto Accelerator Module configuration, use the following procedures:

Removing the Crypto Accelerator Module

NOTE: If you are installing a Crypto Accelerator Module into a J4350 Services Router
for the first time, proceed directly to "Installing a Crypto Accelerator Module" on
page 169.
Crypto
Accelerator
Module
Removing the Crypto Accelerator Module on page 167
Installing a Crypto Accelerator Module on page 169
Replacing and Troubleshooting Hardware Components
Replacing Hardware Components
167