Juniper J4350 Getting Started Manual page 104

J4350 and J6350 Services Router Getting Started Guide
2.
Figure 30: Attaching Center Screw to the Rack
3.
Figure 31: Hanging the Router in the Rack
4.
84
Installing a J4350 and J6350 Services Router
Attach a screw to each rack rail in the third hole down from where you want
the top of the router to be positioned. Screw only part way in, leaving about ¼
in. (6 mm) distance between the screw head and the rail (see Figure 30).
Rail
2 9
Screw
(placed in
center hole) 2 8
Lift the router and insert the larger elliptical openings in the mounting brackets
onto the partially inserted screws so that the router is hanging from the
two screws (see Figure 31).
Verify that the mounting screws on one side of the rack are aligned with the
mounting screws on the opposite side and that the router is level.
1RU (rack unit)
measurement
Front view
Front-mounting bracket
Rail
Center
Elliptical-hanger cutout
screw