Operation Mode - YASKAWA CIMR-MC5A20P4 Instruction Manual

4.2.4 Operation Mode

Operation mode is the mode in which the Inverter can be operated.
Many user constants can't be changed when the Inverter is operating. Refer to User Constant List for de-
tails.
The following monitor displays are possible in operation mode: The frequency reference, output frequen-
cy, output current, and output voltage, as well as fault information and the fault history.
IMPORTANT
When running the Inverter, press the MENU Key first to enter the operation mode and then press the DATA/
ENTER Key from the operation mode display to bring up the monitor display.Run commands can't be re-
ceived from any other display. Once the Inverter is running, it can be switched to other modes.
Operations in Operation Mode
J
Key operations in operation mode are shown in Figure 4.6.
All modes/constants
status
MENU
Operation Mode
MC5 Main Menu
Operation
Conditions for Monitoring
J
Table 4.3 shows the items that can be monitored in operation mode.
Power ON
DAT Frequency reference setting/display
A
ENTER
Frequency Ref
U1- -01 = 0.00 HZ
ESC
Output frequency display
Output Freq
U1- -02 = 0.00 Hz
Output current display
Output Current
U1- -03 = 0.00 A
Output voltage display
Output Voltage
U1- -06 = 0.0 VAC
Function selection U2 (fault trace)
Function U2
Fault Trace
Function selection U3 (fault history)
Function U3
Fault History
Function selection U1 (Monitor)
Function U1
Monitor
Fig
4.6 Operations in Operation Mode
- 11
Contents of fault trace
DAT
A
ENTER
Current Fault
None
ESC
DAT Contents of fault history
A
ENTER
Last Fault
None
ESC
Various monitors
DAT
A
ENTER
Frequency Ref
U1- -01 = 0.00 HZ
ESC
4.2 Modes
4