Basic Operation - YASKAWA CIMR-MC5A20P4 Instruction Manual

This chapter explains the basic settings required to operate and stop the
VS-626MC5. The user constants described here will be sufficient for simple
Inverter.
Even when your application requires special functions, such as torque con-
trol or PID control, make these basic settings first and then go to the explana-
tions of those special functions in chapter NO TAG Advanced Operation.
6.1 Common Settings
6.1.1 Setting the Access Level and Control Method: A1-01,
A1-02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.2 Frequency Reference Settings: b1-01, H3-01, H3-08,
H3-09 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.3 Frequency Reference from Digital Operator: b1-01,
o1-03, d1-01 to d1-09
6.1.4 Run Source and Sequence Input Responsiveness:
b1-02, b1-06, b1-07
6.1.5 Acceleration/Deceleration Times: C1-01 through
C1-08, C1-09, C1-10, C1-11
6.1.6 Prohibiting Reverse Operation: b1-04
6.1.7 Selecting the Stopping Method: b1-03
6.1.8 Multi-function Input Settings: H1-01 through H1-06
6.2 Open-loop Vector Control
6.2.1 Autotuning for general-purpose motors
6.2.2 Autotuning for machine tool spindle motors
6.2.3 Autotuning Faults
6.3 Flux Vector Control
6.3.1 PG Speed Control Card Settings
6.3.2 Setting the Zero-speed Operation Constants
6.3.3 Autotuning for general-purpose motors
6.3.4 Autotuning for machine tool spindle motors
6.3.5 Autotuning Faults
6.3.6 Speed Control (ASR) Structure
6.3.7 Speed Control (ASR) Gain
- 1

Basic Operation

. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
6
6 - 2
6 - 2
6 - 4
6 -7
6
6 -9
6 - 10
6 - 11
6 - 12
6 - 12
. .
6 - 17
6 - 17
6 - 18
6 - 21
6 - 22
6 - 22
6 - 25
6 - 27
6 - 29
6 - 31
6 - 32
6 - 34