Confirmations Upon Delivery; Nameplate Information - YASKAWA CIMR-MC5A20P4 Instruction Manual

Handling Inverters

2.1.1 Nameplate Information

2.1

Confirmations upon Delivery

2
2.1.1 Nameplate Information
D Never install an Inverter that is damaged or missing components.
Doing so can result in injury.
Check the following items as soon as the Inverter is delivered.
Table
2.1
Item
Has the correct model of Inverter been
delivered?
Is the Inverter damaged in any way?
Are any screws or other components
loose?
If you find any irregularities in the above items, contact the agency from which you purchased the Inverter or
your Yaskawa representative immediately.
J Example Nameplate
Standard domestic (Japan) Inverter: 3-phase, 200 VAC, 0.4 kW, IEC IP20 and NEMA 1 standards
Model number
Input specifications
Output specifications
Lot number
Serial number
Inverter Model Numbers
J
Inverter
VS-626MC5
No. Specification
A Standard domestic model
No. Voltage Class
2 AC input, 3-phase, 200 V
4 AC input, 3-phase, 400 V
CAUTION
Checks
Check the model number on the nameplate on the side of the Inverter (See
2.1.1).
Inspect the entire exterior of the Inverter to see if there are any scratches or
other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
MODEL : CIMR-MC5A20P4 SPEC: 20P41F
INPUT : AC 3PH 200-220 V 50Hz
200-230 V 60Hz
0-230 V 1.2kVA 3.2 A
OUTPUT : AC 3PH
LOT NO :
SER NO :
YASKAWA ELECTRIC CORPORATION
CIMR - MC5 A 2 0P4
"P" indicates the decimal point.
- 2
Method
Inverter specifications
MASS : 3.0kg
Mass
JAPAN
No. Max. Motor Capacity
0P4
0.4 kW
0P7
0.75 kW
to
to
75 kW
075