Furuno FS-5070 Operator's Manual page 92

5. ROUTINE MESSAGE CALLING, RECEVING
11. Press the CALL key to send the PSTN call (transmission time: about seven seconds).
The display shows the following message.
PSTN request
message in progress!
DESTINATION ID :
TEL NO. :
1234567890123456
DSC FREQ :
TIME TO GO:
One of the following three displays appears. ("No response! Try calling again?" appears
after timer counts down to zero and it means there was no response from the coast station.)
Waiting for
acknowledgement.
DESTINATION ID :
001234567
TEL NO. :
1234567890123456
DSC FREQ :
12577.5 kHz
TIME TO GO: 25S RESENDING
12. Do one of the following depending on the message shown in step 11.
Waiting for acknowledgement
If the PSTN call is accepted, the PSTN connection call is sent (transmission time: about
seven seconds), showing the display below.
PSTN connection
message in progress!
DESTINATION ID
TEL NO. :
1234567890123456
2222.2kHz
TELEPHONE:
DSC FREQ :
TIME TO GO:
After the call is sent the following messages appears.
Waiting for
acknowledgement.
SENDER ID :
TEL NO. :
1234567890123456
TELEPHONE: 2222.2kHz
DSC FREQ :
TIME TO GO: 25S
5-32
001234567
12577.5 kHz
7S
Unable acknowledge
message received.
CANCEL: STOP ALARM
SENDER ID :
TEL NO. :
:
001234567
12577.5 KHZ
7S
001234567
12577.5 KHZ
RESENDING
001234567
1234567890123456
No response!
Try calling again?
DESTINATION ID :
001234567
TEL NO. :
1234567890123456
DSC FREQ :
12577.5 kHz
RESEND