Furuno FS-5070 Operator's Manual page 154

10. NBDP TRANSMITTING, RECEIVING
Note: If signal conditions are poor, connection may take a while. If the line could not be
connected in one minute, calling stops and "Calling failed" appears. Try step 3
again, one minute later. Should signal conditions worsen during message
transmission, "Error" appears in reverse video and 30 seconds later the line is
disconnected.
5. Transmit message by one of the following methods:
Sending a file stored on a floppy disk
1. Press the function key F7 (WRU) to receive the answerback code of the other station.
Verify that the code from the station called is correct.
2. Press the function key F8 (HR) to transmit your own identity (answerback code).
3. Press the function key F3 and then the 3 key to display the Send file screen.
4. Choose file to send and press the Enter key.
5. Press the Enter key again.
[A:\TEST1.
LOG File
TEST1.
TEST2.
TEST3.
NBDP
[
4 Files exist
To select : ENTER
Sending volume (percentage of message transmitted, counts upward as the message is
being transmitted), ARQ error count and ARQ transmission time appear on the display.
"Lock" appears in reverse video when the mark and space signals in the receive signal are
normal. "ARQ Error" shows the number of times error was found during transmission. "ARQ
Time" is the time in seconds the communication line has been established.
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Station Name
Frequency (T/R) :
Comm Status
Sending Volume
6. After the message is transmitted, press the function key F10 (Break) to disconnect the
line.
Type a message from the keyboard
1. After exchanging answerback code by the function key F7 (WRU) and F8 (HR), type
your message directly from the keyboard.
2. To change direction of traffic, press the function key F9 (OVER), or +, ? in order. Then,
the other station becomes the information sending station, your station becomes the
10-4
Send File
File name Size
120
151
180
169
End of Directory
To view : SPACE
Send file screen
:
8765.00 / 8965.00(kHz)
: Connect Send Lock
: 100(%) ARQ Error : 0
Communication status display
]
Date & Time
52 02-10-15 17:25
02-10-10 16:30
02-10-11 09:25
02-10-11 20:16
02-10-12 06:23
1454000 bytes free
To quit : ESC
2002-09-08 2:14:28 UTC
Comm Mode :ARQ
Error
ARQ Time : 0(sec)
]
Caps-Eng
HT