Ssb Radiotelephone; Choosing Class Of Emission - Furuno FS-5070 Operator's Manual

2.

SSB RADIOTELEPHONE

You can use the SSB communication in the RT (radiotelephone) mode. Press the RT/CH
key to show the RT screen.
2.1

Choosing Class of Emission

There are three emission modes, SSB, TLX and AM.
•SSB: Single Sideband
•TLX: Telex (see chapter 7 to 10.)
•AM: AM (You cannot transmit in the AM mode.)
At the radiotelephone screen, choose class of emission as follows:
1. Rotate the ENTER knob to highlight the emission mode (default: SSB) and then push the
ENTER knob. When rotating the ENTER knob clockwise, the cursor moves from "CH" to
downward.
Emission mode
2. Rotate the ENTER knob to choose mode desired and then push the ENTER knob.
AGC is automatically selected according to emission mode.
• SSB : AGC FAST
•TLX: AGC OFF
•AM: AGC SLOW
3. However, you may change it as below .
4. Rotate the ENTER knob to choose AGC mode and then push the ENTER knob.
CH:
Tx: 2182.0 kHz
Rx: 2182.00 kHz
SSB SIMP HIGH FAST NB SQ
SEN
IA
10.0A
MMSI xxxxxxxxx
35 00.0000N
POS
135 00.0000E
5. Rotate the ENTER knob to choose OFF, SLOW or FAST as appropriate and then push the
ENTER knob.
CH: 200
Tx: 2182.0 kHz
Rx: 2182.00 kHz
SSB SIMP HIGH FAST NB SQ
SSB
SEN
SEN
TLX
LA
LA
10.0A
AM
MMSI xxxxxxxxx
35 00.0000N
POS
135 00.0000E
200
OFF
FAST
FAST
S
FAST
SLOW
FAST
UTC 00:00
EPFS 23:59
AGC mode
S
UTC 00:00
EPFS 23:59
2-1