Furuno FS-5070 Operator's Manual page 209

FURUNO
SPECIFICATIONS OF SSB RADIOTELEPHONE
1 MF/HF DIGITAL RADIOTELEPHONE
1.1 GENERAL
1.1.1 Communication system Full-duplex*
1.1.2 Class of emission
1.1.3 Frequency range
1.1.4 Number of channel
1.1.5 Display method
1.1.6 Backlight
1.1.7 Contrast
1.1.8 Warming up
1
* : Operating frequency should not be higher than 22 MHz for full-duplex communication,
FS-5070 only
1.2 TRANSMITTER
1.2.1 Frequency range
1.2.2 RF output power
1.2.3 Frequency error
1.2.4 Modulation AF response
1.2.5 Modulation system
1.2.6 AF Input
1.2.7 Line in
2
*
: RF output power should be restricted to 400W on NBDP.
1.3 RECEIVER
1.3.1 Receiving system
1.3.2 Frequency range
FS-1570/2570/5070
1
, semi-duplex or simplex
J3E: Telephone
J2B (F1B): DSC and NBDP
H3E: reception only
100.00 kHz to 29,999.99 kHz
User programmable: 256 TX/RX pairs
All ITU channels incorporated (include DSC/NBDP channel)
2182 kHz (single action)
Monochrome LCD (180 x 96 dots)
8 tones
64 steps
1 minute approx. (oven 20 minutes approx.)
1,606.5 kHz to 26.175 MHz (100 Hz step)
FS-1570: 1.6 kHz-4 MHz: 75/100 Wpep (J3E, J2B (F1B))
4.0-26.175 MHz, 150 Wpep (J3E, J2B (F1B))
FS-2570: 1.6-4.00 MHz, 75/100/200 Wpep (J3E, J2B
(F1B))Wpep
FS-5070: 1.6-4.0 MHz, 400 Wpep, 4kHz-26.175 MHz: 500
2
Wpep*
Within ±10 Hz
350 Hz to 2.7 kHz (SSB)
Low power balanced modulation
-46 dBm/600 ohm (Handset/Microphone)
0 dBm/600 ohm
Double-conversion superheterodyne
100 kHz-29,999.99 kHz (10 Hz step)
SP - 1
FS-1570/2570/5070
E5656S01A-M
080414