Nbdp Preparations; Registering Answerback Code & Id Codes; Registering Answerback Code - Furuno FS-5070 Operator's Manual

8.

NBDP PREPARATIONS

This chapter provides the procedures necessary for preparing the NBDP Terminal Unit for
transmitting and receiving. For automatic telex, you will need to register the following:
• Your ship's ID and answerback codes
• Stations
• Timer programs
• Scan channel groups
• User channels
8.1 Registering Answerback Code & ID Codes
Enter your ship's answerback code and ID codes as shown below.
Note: The answerback and ID codes cannot be changed once entered; be sure to enter the
codes correctly.
8.1.1

Registering answerback code

1. Press the function key F5 and then the 5 key. The display should look something like the
illustration below.
2. Enter your ship's answerback code (max. 20 characters, including spaces) and press
the Enter key. The prompt "OK/Cancel" asks for verification of data. If the code is correct,
press the Enter key again.
Note: Example of answerback code: 123456789 FURU X.
Answerback Code Entry
Answerback Code
_
Answerback code entry screen
8-1