Commands - Furuno FS-5070 Operator's Manual

10. NBDP TRANSMITTING, RECEIVING
10.9.3

Commands

The tables which follows describe the commands for macro operation
Command
(Prefixed with @)
CALL
FREE (support
command for CALL)
RETRY (support
command for CALL)
CASE
TIMEOUT (support
command for CALL)
SEND
WRU
HR
OVER
BREAK
DISPLAY
INPUT
Commands processed by Danish coast station Lyngby
Command Function
BRK+ Disconnection communications line
DIRTLX ......+ Direct dialing telex (receive only)
KKKK Terminate message
LTR+ For telex letters mailed from Operations Station to destinations worldwide
MED+ Request medical advice
OPR+ Requesting operating assistance
POS+ Send position data
STA+ Status requested on a store-and-forward message
TLX ......+ Store-and-forward method
For details, consult the coast station's traffic manual.
10-12
Parameter
S: Station Name
Two digits, 0-99 min.
$RRR$ signal
Two digits, 0-99 min.
Text
Two digits, 0-99 min.
Text
A: file name
None
Text
None
Content
Calling station name and ID on assigned
parameter
Free-signal searching time according to
assigned parameter (default setting: 10
min)
Detect free signal of dot pattern
Calling according to assigned parameter
(default setting: 10 min)
For receiving a message (designated by
parameter) transmitted by coast station
Time allotted for reception of message by
CASE command
Text transmitted according to assigned
parameters
Send a file from floppy disk
Function keys F7 – F10
Text of message appears
Waiting for keyboard input
Transmit keyboard input message