Furuno FS-5070 Operator's Manual page 73

Compose msg.
MSG TYPE :
GROUP MESSAGE
GROUP ID :
012345678
PRIORITY : ROUTINE
FREQUENCY
COMM MODE : TELEPHONE
CHANNEL
COMM FREQ
DSC FREQ : 2M-INTL
GO TO VIEW
GO TO ALL VIEW
8. Rotate the ENTER knob to choose communication frequency desired and then push the
ENTER knob. (See page 5-3 for details.) NO INFO lets other party choose
communication frequency.
9. Push the ENTER knob to open the DSC FREQ menu.
Compose msg.
MSG TYPE
: Individual
2 MHZ
GROUP ID
: 001234567
4 MHZ
PRIORITY
: Routine
6 MHZ
COMM MODE
: Telephone
8 MHZ
COMM FREQ
: No infor
12 MHZ
DSC FREQ
:
10. Rotate the ENTER knob to choose DSC band desired and then push the ENTER knob
to open the DSC FREQ menu.
11. Rotate the ENTER knob to choose DSC frequency desired and then push the ENTER
knob. (See "How to Set DSC Frequency" on page 5-4 for details.)
Compose msg.
MSG TYPE :
GROUP MESSAGE
GROUP ID :
012345678
PRIORITY : ROUTINE
COMM MODE : TELEPHONE
COMM FREQ : 2164.0 kHz
DSC FREQ : 2M-INTL
GO TO VIEW
12. Press the CALL key to send the group call (transmission time: about seven seconds).
The display shows "Group message in progress!" while the call is being sent.
Group
message in progress!
SENDER ID :
PRIORITY :
TELEPHONE
DSC FREQ :
TIME TO GO :
13. Press the CANCEL key twice to show the radiotelephone screen after the call is sent.
14. If you selected TELEPHONE at step 7, communicate by radiotelephone. For NBDP, do
the following:
MESSAGE
E
ONE
12M-INTL
GO TO VIEW
012345678
ROUTINE
2164.0 kHz
2177.0 kHz
6S
5. ROUTINE MESSAGE CALLING, RECEVING
Rotate the ENTER
16 MHZ
knob to select.
18 MHZ
22 MHZ
25 MHZ
5-13