Setting Up Various Displays; The Data Display - Furuno DUAL GPS GP-150-DUAL Operator's Manual

6. SETTING UP VARIOUS DISPLAYS

6.1

The Data Display

The user may select what data to display in
four locations on the data display.
JAN 12, 2009 23:59'59" U
Position
12 23.456' N
123 23.456' E
W84
RNG BRG
223.4
31.23
NM
SOG COG
12.3
123.4
kn
User-defined
User-defined
display data #1
display data #4
User-defined
display data #2
User-defined
display window
Figure 6-1 Data display
The data the user may display are;
•
Altitude (ALT)*
•
Average course (AVR COG)
•
Average speed (AVR SOG)
•
Course (COG)
•
Course error (dCOG)
•
Cross track error (XTE)
•
Depth (WAT DPTH)#
•
ETA to waypoint (ETA)
•
Range to waypoint (RNG)
•
Bering to waypoint (BRG)
•
Route time-to-go (ROUTE TTG)
•
Speed (SOG)
•
Time-to-go to waypoint (TTG)
•
Total route distance (ROUTE DIST)*
•
Trip distance (TRIP)
D3D 100m
* * SAFE
TO : 001
MARINE
POINT1
: 002
NEXT
MARINE
POINT2
User-defined
display data #3
•
Trip elapsed time (TRIP TIME)
•
Water temperature (WAT TEMP)#, and
•
Velocity to destination (VTD)*
•
ETA to route
*ALT: Displayed only in 3D position fixing.
*ROUTE DIST: Total distance from current
position to ultimate destination. Appears
when following a registered route or a
cursor-created route.
*VTD: When following a route, plus or minus
appears next to indication to denote which
direction the route is being traversed.
# Requires external sensor.
1) Press MENU ESC, 9 and 1 to display the
PLOTTER SETUP menu.
PLOTTER SETUP
Memory Apportion
Bearing REF
MAG Variation
Calculation
User defined #1
User defined #2
User defined #3
User defined #4
ENT:Enter MENU:Escape
Figure 6-2 PLOTTER SETUP menu
2) Press or to select one of four of
"User defined" (#1, #2, #3, #4).
3) Press or to select data to display.
4) Press the NU/CU ENT key. To select the
data to display at other user defined
displays, repeat steps 2 and 3.
5) Press the MENU ESC key.
TRK = 1000 / 2000Pt
MAG
True
AUTO
MAN
(00 E)
(07 W)
RL
GC
SOG
COG
RNG
BRG
6-1