Cross Track Error (Xte) Alarm - Furuno DUAL GPS GP-150-DUAL Operator's Manual

7. ALARMS
Anchor watch alarm
The anchor watch alarm sounds to warn you
that own ship is moving when it should be at
rest.
Alarm
Own ship's
setting
position
Destination
waypoint
Figure 7-4 How the anchor
watch alarm works
Before setting the anchor watch alarm, set
present position as destination waypoint,
referring to chapter 5.
1) Press MENU ESC and 4.
2) Press to select Arrival/Anchor.
3) Press or to select ANCH.
4) Press to select Alarm Range.
5) Key in alarm range (0.001-9.999 NM).
6) Press the NU/CU ENT key.
7) Press the MENU ESC key.
When own ship drifts by the range set here,
the buzzer sounds and the message "Anchor
Alarm" appears.
7-2
7.3
The XTE alarm warns you when own ship is
off its intended course.
Starting
: Alarm range
waypoint
1) Press MENU ESC and 4.
2) Press
3) Press
4) Press
5) Key in alarm range (0.001-9.999 NM).
6) Press the NU/CU ENT key.
7) Press the MENU ESC key.
When own ship strays from the intended
track by the range set here, the buzzer
sounds and the message "Cross Track Error
Alarm" appears.
Cross Track Error (XTE)
Alarm
Own ship's
position
Figure 7-5 How the XTE alarm works
or to select XTE.
or to select On.
to select Alarm Range.
Destination
Alarm
waypoint
setting
: Alarm range