Furuno GP-170 Operator's Manual

GNSS NAVIGATOR
English
How to operate the main menu
MENU
ESC
How to open the list
LIST
Mark List
GP-170
Model
then
OR
~
DISPLAY
1
Press appropriate numeric key.
How to switch the
operation mode
NU/CU NU: North up
ENT
CU: Course up
How to adjust the brilliance of the display and panel
BRILL
LIST
Route List
Operator's Guide
NU/CU
ENT
CENTER
8
Shifts display or cursor.
Goes back
one layer in
multi-layer
menu.
Display brilliance
Panel brilliance
LIST
Station List
(Requires internal beacon receiver.)
The purpose of this guide is to provide the
basic operation for this equipment. For more
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
~
CURSOR
ON/OFF
0
If needed, repeat one of these steps.
How to open the context menu
For example, context menu for a mark.
Select the menu item.
Goes forward to one
layer in multi-layer menu.
MENU
ESC
Select a mark with the cursorpad.
How to turn the
power on/off
then
NU/CU
ENT
OR
MENU
ESC
ZOOM
OUT
9
(numeric key)