Data 3 Output Setting - Furuno DUAL GPS GP-150-DUAL Operator's Manual

10. INSTALLATION

DATA 3 output setting

The DATA 3 can output NMEA 0183 (V1.5/V2.0) /IEC 61162-1 data or log pulse
depending on jumper block setting on the NAV board. For NMEA 0183
(V1.5/V2.0) /IEC 61162-1, the same signal of DATA 1 is output from DATA 3.
Selection of NMEA0183 or log pulse
Output data
NP board
JP3
JP4
JP10
Rate of log pulse output
150 mA Max.
50 VDC
Procedure for setting of log pulse rate
1) Press ESC MENU, 9 and 3.
2) Press
3) Press
400ppm.
4) Press the CU/NU ENT key.
5) Press the MENU ESC key.
10-14
NMEA 0183 (V1.5/
V2.0)/IEC 61162-1
(Default Setting)
#1-2
#1-2
#1-2
to select DATA 3. Log Pulse.
or to select log pulse for external equipment; 200ppm or
Log pulse
#2-3
#2-3
#2-3