Adjusting Tone And Brilliance; Plotter Displays - Furuno GP-1640 Operator's Manual

1.4 Adjusting Tone and
Brilliance
1. Press the [POWER/BRILL] key with a
touch-and-release action. The tone and
brilliance window appears.
TONE
BRILL
Tone and display brilliance setting menu
Tone and brill window
2. Press ◄ or ► to adjust display tone.
3. Press ▲ or ▼ to adjust display brilliance.
Note that tone and brilliance can also be
adjusted by soft keys. After pressing the
[POWER/BRILL] key, use the appropriate soft
key to adjust tone or brilliance. You can adjust
TONE by pressing the [POWER/BRILL] key
continuously.
Note: Tone or brilliance must be adjusted
within 10 seconds after pressing the
[POWER/BRILL] key or the tone and
brilliance adjustment screen will be
erased.
1.5
There are four types of plotter displays: Plotter
display, Navigation data display, Steering
display and Highway display. For details, refer
to Chapter 2.
Functions
Plotter display, Navigation data
display
TONE
Press the [PLOT] key to display the Plotter
display and Navigation data display alternately.
TONE
BRILL
BRILL
RETURN
Soft keys

Plotter Displays

WP-002
FISH
BRIDGE
GPS 3D
[Plotter Display]
DATE: MAY 24 2002 TIME 23:59:59
TRIP:123nm
POSITION
34° 56.789' N
135° 56.789' E
SPD RNG
16.3 27.2
kt
CSE BRG
245.8° 245.0°
DATUM: WGS-84
TMP 68.8°F DEP 20.8ft
GPS 3D
[Nav Data Display]
Display modes (plotter, navigation data)
NORTH
UP
ZOOM
IN
ZOOM
OUT
COURSE
UP
NAV
POS
LAT/LON
LAT
LON
TD
nm ZOOM
SAT
INFO
BEACON
INFO
1-3