Furuno DUAL GPS GP-150-DUAL Operator's Manual page 111

FURUNO
3 INTERFACE
3.1 Number of ports
3.1.1 Data format
3.1.2 IN:
OUT:
4 POWER SUPPLY
4.1 Display unit
4.2 Rectifier (PR-62, option) 100/110-115/220/230 VAC, 1 phase, 50/60Hz
5 ENVIRONMENTAL CONDITION
5.1 Ambient temperature
Antenna unit
Display unit
5.2 Relative humidity
5.3 Degree of protection
Antenna unit
Display unit
5.4 Vibration
6 COATING COLOR
6.1 Antenna unit
6.2 Display unit
4
IEC61162-1 (JUL-2000), NMEA0183 Ver1.5/2.0
DATA 1 and 2*: AGFPA, DBT, DPT, MTW, TLL
HDG**, HDM**, HDT**, VBW**, VHW**
DATA 3: MOB from external device (contact closure),
DATA 4: DGPS correction data in RTCM SC-104 V2.0,
Waypoint data downloaded from YEOMAN plotter,
Waypoint data or navaids information from conventional PC
AAM, APA, APB, BOD, BWC, BWR, BWW, DTM, GBS, GGA, GLL,
GNS, RMB, RMC, Rnn, RTE, VTG, WCV, WNC, WNR, WPL, XTE,
ZDA (or LOGOUT depending on jumper setting for Port 3),
Waypoint data to conventional PC (Data 4 only)
*GP-150-Dual: DATA 2 port is used for the system connection.
**: GP-150 only
12-24 VDC: 0.8-0.4 A (w/ internal beacon receiver)
-25ﾟC to 70ﾟC
-15ﾟC to 55ﾟC
95 % at +40ﾟC
IPX6
IPX5 (USCG CFR-46)
-2 - 5 Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(7 m/s² maximum acceleration at 13.2 Hz)
-13.2 - 100 Hz with a constant maximum acceleration of 7 m/s²
N9.5 (white)
N3.0
SP-2
GP-150/Dual
E4440S01C-M