Cleaning The Sensor - Trane WTS Installation, Operation And Maintenance Manual

Maintenance and Troubleshooting

Cleaning the Sensor

Equipment Damage!
Spraying glass cleaner or any other solution directly on the sensor may damage it.
You can clean the sensor by applying glass cleaner to a soft, non-abrasive cloth, and gently wiping
the face, including the buttons and LCD display. Use of a pre-moistened towelette designed for lens
or screen cleaning is also acceptable.
Avoid inadvertent pressing of the Occupied/Unoccupied buttons on the model WZS sensor or the
keypad on the WDS sensor, as this may result in an unwanted timed override or settings change.
44
NOTICE:
BAS-SVX04G-EN