Multiple Transformer Wiring - Trane WTS Installation, Operation And Maintenance Manual

Multiple Transformer Wiring

Shock Hazard!
If the use of multiple transformers is necessary, locate them so that they do not allow
simultaneous human contact. Touching both 24 Vac outputs simultaneously on two
electrically connected transformers could result in death or serious injury.
Using a dedicated transformer to power the receiver is seldom necessary and is not advised. Use
it only when the host transformer does not have enough volt-ampere (VA) capacity to power the
receiver (see
If you are using a dedicated transformer to power the receiver, make sure the grounds (commons)
of the multiple transformers are electrically connected to one another, as shown in the diagram.
BAS-SVX04G-EN
"Specifications," p. 45 for receiver power consumption).
Appendix A: Wiring Diagrams
WARNING
47