Replacing The Sensor Cover - Trane WTS Installation, Operation And Maintenance Manual

Installation
3. Press the left and right arrows for 4 seconds.
Table 2.
Note: If you try to access a feature that is locked, the locked symbol

Replacing the Sensor Cover

To replace the cover:
1. Hook the cover over the top of the back plate. Apply light pressure to the bottom of the cover
2. Install the security screw into the bottom of the cover (if desired).
26
If you press a keypad button to try change a locked setting, the locked symbol will flash.
until it snaps in place.
will appear on the display.
Security screw
BAS-SVX04G-EN
