Operation
This section describes sensor operations.
Temporary Occupancy (Timed Override)
Temporary occupancy (timed override) is available on models WDS and WZS. Temporary
occupancy can be selected to adjust temperature, fan, or heat/cool settings after the system has
changed to unoccupied mode. System control will revert to unoccupied after a pre-determined time
period.
Note: Not all systems support the occupancy function.
Model WZS Sensor
The model WZS sensor has Occupied and Unoccupied buttons for selecting and canceling
temporary occupancy.
To select temporary occupancy, press the Occupied button
following occurs:
•
•
To cancel temporary occupancy, press the Unoccupied button
following occurs:
•
•
Figure 6.
Model WDS Sensor
To select and cancel temporary occupancy on a model WDS sensor, see
Occupancy" p.
BAS-SVX04G-EN
Space temperature output is driven to 10 (nominal).
The output generates for 4 seconds.
Space temperature output is driven to 1330 (nominal).
The output generates for 4 seconds.
WZS sensor: Locations of Occupied button and Unoccupied buttons
33.
(Figure
6) for 0.2–6 seconds. The
(Figure
6) for 0.2–6 seconds. The
Occupied button
Unoccupied button
"Requesting Temporary
27